I have listed the distance from the center of the hitch pin hole to the outer edge of the bumper on all of the class III trailer hitch receivers we have for your 2019 Honda Odyssey below:
etrailer.com Trailer Hitch Receiver - part # e98855 (3")
Curt Trailer Hitch Receiver - part # C13370 (3")
Curt Trailer Hitch Receiver - part # C64NR (4-1/2")
Therefore, the Curt Trailer Hitch Receiver part # C64NR will be the most recessed and the etrailer.com Trailer Hitch Receiver part # E98855 or... view full answer...
The only difference between the Draw-Tite Sportframe Class I Trailer Hitch, # 24863, and the Hidden Hitch Class I Trailer Hitch, # 60280 (no longer available), is that the Hidden Hitch Trailer Hitch includes a ball mount.
Draw-Tite and Hidden Hitch are sister companies that use the same design, specifications and materials for their products. The only advantage to purchasing one over the other is that you will get a ball mount with the Hidden Hitch trailer hitch. In this case you will... view full answer...
I would be happy to compare the trailer hitch options for your 2015 Toyota Highlander. As you mentioned you have three options, Curt # C13200, Draw-Tite # DT65MR, and Hidden Hitch # 87660. These are all Class III trailer hitches with a towing capacity of 6,000 lbs and a tongue weight capacity of 900 lbs.
The difference in non-trailer loads does not affect the 2015 Highlander. Curt will require the use of a stabilizing strap for non-trailer loads on their Class I, Class II and some Class... view full answer...
I spoke with my contact at Curt and he told me that the Curt Trailer Hitch, # C13651, does sit lower to the ground than the Curt Hitch, # 13650. Both trailer hitches will fit the 2005 to 2011 Ford Escape without a factory hitch, but the # C13651 will fit on models that were equipped with a factory 1-1/4 inch hitch.
Once installed, the Curt Trailer Hitch # C13651 will sit approximately 13-1/2 inches from the ground and hitch # 13650 will sit approximately 13-1/4 inches from the ground.... view full answer...
That's a really good question because it can be difficult to get a comparison but vehicle manufacturers sell their OEM parts just like aftermarket retailers so I was able to find the Subaru trailer hitch for a 2020 Subaru Forester, and the advantages of going with an aftermarket hitch are pretty extensive.
The most significant difference is the class and receiver size of the OEM hitch compared to the aftermarket hitches. The factory Subaru hitch is a Class I, 1-1/4 inch hitch. Meanwhile,... view full answer...
Basically, the trailer hitches you are looking at fit 2 different vehicles. The CURT Trailer Hitch, # 13581, is designed to fit NON-Sport models of the 2011 Mitsubishi Outlander.
If you have a Sport model, you would need CURT Trailer Hitch, # C13079.
The vehicles have different mounting points and dimensions so they require different hitches. I have included a link to the installation details for both hitches for you to view.
With either hitch, I recommend etrailer Ball Mount kit,... view full answer...
The only difference between the Curt Trailer Hitch Receiver # C13264 and etrailer Trailer Hitch Receiver # e98905 for your 2022 Toyota Tacoma is the finish; apart from that, the two hitches have the same installation, capacities, and look. The best hitch for you really depends on the look you prefer for your '22 Tacoma.
If you want the hitch to have a glossy finish, then the right hitch is the Curt Trailer Hitch Receiver # C13264.
Of if you prefer a matte black finish then go with the... view full answer...
There are two main trailer hitch options for a 2020 Chevrolet Traverse, the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76184 (see photo one) and the Curt Trailer Hitch Receiver part # C13380 (see photo two). The main difference between the two is that Draw-Tite hitch installs behind the rear bumper so it will be more difficult to install but then again it will also provide a much cleaner look once installed. On the other hand, the Curt hitch will be much easier to install but it... view full answer...
That's a really good question because it can be difficult to get a comparison but vehicle manufacturers sell their OEM parts just like aftermarket retailers so I was able to find the Subaru trailer hitch for a 2019 Subaru Forester, and the advantages of going with an aftermarket hitch are pretty extensive.
The most significant difference is the class and receiver size of the OEM hitch compared to the aftermarket hitches. The factory Subaru hitch is a Class I, 1-1/4 inch hitch. Meanwhile,... view full answer...
The eTrailer.com Trailer Hitch Receiver part # E98869 and the Curt Trailer Hitch Receiver part # 13241 which are both a fit for your 2018 Nissan Frontier have the same shape/design/capacity but are not exactly the same. The difference between them is in regards to their finish. The eTrailer hitch has more of a matte finish whereas the Curt trailer hitch has more of a gloss finish. They both have the same durability.
I have attached an install video for you as well as a few photos. view full answer...
The only difference between the Curt Trailer Hitch # 13084 and the Curt Trailer Hitch # 13160, is the shape of the tubing.
Curt Trailer Hitch # 13084 has a square-tube design while the Curt Hitch # 13160 has a round-tube design. The square-tube hitch will be more visible on the back of your Jeep while the round-tube hitch will be tucked up just a little more. The round-tube hitch is designed to be a more sleek design.
Both the Curt Hitch # 13084 and # 13160 have the same towing and tongue... view full answer...
There are indeed quite a few trailer hitch options for a 2019 Subaru Outback but they can all be broken down into two categories, concealed cross tube and visible cross tube. The concealed cross tube option I recommend is the Curt Trailer Hitch Receiver part # C13410 and the visible cross tube option I recommend is the Curt Trailer Hitch Receiver part # C13206. I prefer Curt as the quality of their trailer hitches is better than that of Draw-Tite in my experience with holes lining up and... view full answer...
Basically a lot depends on what you will be using the hitch for. If it is just for accessories such as a bike rack or cargo carrier than for the most part you will be fine with a Class II trailer hitch. If you will be towing then I would go with the stouter Class III hitch.
There are several differences between a Class II and Class III trailer hitch. The biggest differences are the size of the receiver opening and the capacities. A Class II trailer hitch will have a 1-1/4 inch receiver... view full answer...
A class II trailer hitch, the Curt Trailer Hitch Receiver part # C12091 is a far better option to use on your 2016 Lincoln MKZ Hybrid even for carrying bikes with a hitch mounted bike rack. The reason for this is that it can 1) allow you to carry more bikes if needed and 2) allows for a greater amount of hitch mounted bike racks to be chosen from. The maximum number of bikes you can carry no matter their weight on a class I trailer hitch is two and there are a lot of bike racks that are... view full answer...
You will often pay inflated prices at car dealers. There is really no difference between the trailer hitch and wiring harness that Toyota offers for your 2009 Toyota Venza than the Curt Trailer Hitch, # 13356, and the Curt Trailer Wiring Harness, # C56079.
All trailer hitches must pass specific tests whether they are OEM or aftermarket. In fact, Curt is in the OEM market as well as the aftermarket. Curt manufactures trailer hitches for a few different vehicle manufacturers. All of their... view full answer...
There is only one difference between the Curt Trailer Hitch Receiver # C13176 and etrailer Trailer Hitch Receiver # e98909 that fit your 2020 Chevrolet Colorado, which is the finish.
The Curt trailer hitch has a glossy black finish while the etrailer hitch has a matte black finish; other than that everything is equal, such as their 6,000 lb towing/900 lb tongue weight capacities, as well as the installation.
The two have hidden crosstubes which means only the receiver is showing (see... view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2", part # 75547, will still be my recommendation. It has a maximum tongue weight of 675 lbs and a maximum gross tongue weight of 4,500 lbs, which is greater than the other compatible trailer hitch receivers. It weigs 32.8 lbs. The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2", part # 306-X7291, you reference in your question is actually the heavier of the two trailer hitches. It weighs 36 lbs.
I... view full answer...
Absolutely, and the only difference between the Curt and etrailer hitches for your 2023 Acura MDX is their finish. The Curt hitch has a glossy black finish while the etrailer hitch has a matte black finish. So you can choose from whichever finish you like best for your '23 MDX, with the hitches that fit being the following part numbers:
- Curt Trailer Hitch Receiver # C22HR
- etrailer Trailer Hitch Receiver # e27KR
I like the matte black finish as it hides the inevitable scratches and... view full answer...
There is just a single difference between the Curt and etrailer trailer hitches that fit your 2023 Toyota Venza, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer. The hitches that fit your '23 Venza are the following part numbers:
- etrailer Trailer Hitch Receiver # e25AR
- Curt Trailer Hitch Receiver # C89UR
The matte black finish is nice as it hides the inevitable dings, scuffs and scratches better... view full answer...
Only a single difference exists between the Curt and etrailer trailer hitches for your 2024 Nissan Frontier, which is the finish. The etrailer hitch has a matte black finish, while the Curt hitch has a glossy black finish, so you can choose which you prefer. The hitches that fit your '24 Frontier are the following part numbers:
- Curt Trailer Hitch Receiver # 13241
- etrailer Trailer Hitch Receiver # e98869
The matte black finish does hide those inevitable small scuffs a bit better than... view full answer...
Go To Results